Replacing 3rd brake light on 2005 Ford F-150

Posted on December 19, 2014December 31, 2014 by David Regal / Posted in Mantrist, Tutorials / Leave a comment

Don’t be selfish . . .

Our 3rd brake light was damaged in hailstorms. There were lots of cracks on the plastic and I know, eventually, moisture would burn out the bulbs or water might get into the cab.

This will work for Ford F-150s 2004, 2005, 2006, 2007, and 2008.

Steps:

Buy part on Amazon for $40ish – http://www.amazon.com/gp/product/B0052UIKL4/ref=cm_cr_ryp_prd_ttl_sol_11
Get your tools ready:
1. Phillips head screwdriver.
2. Rag.
3. Truck keys.
4. Stick or 2×4 about 2 feet long, or happy assistant to push on brake pedal (children old enough to complain about chores are a great option).
5. Caulk – I used DAP from Home Depot.
Unscrew old light. Set screws aside in a place where they won’t roll off.
Twist light bulb connectors from horizontal to 10 o’clock – 4 o’clock orientation (see picture).
Gently remove bulbs.
Remove center bulb and discard.
1. At first, I was worried that I had purchased the wrong part but removing the center bulb to expose the connector showed the new light was a plug-and-play match.
Plug in electrical connector into new light.
Place bulbs in new light in a 10 o’clock – 4 o’clock orientation (see picture).
Push and twist bulbs to be in a horizontal position.
Push 2 white plastic grommets into place holes.
Clean mounting surface with rag.
Use DAP caulk to seal top half of mounting surface (optional).
Line up clips with screw holes.
Mount new light lining up starting from bottom.
Test light by turning on truck electric (position right be starting engine), placing 2×4 or other block between seat and brake pedal or asking assistant to press brake. I happened to have a the lug wrench handy.
Screw in light.
Celebrate success!

Don’t be selfish . . .

Boxes to Bins :)

Posted on October 5, 2014October 5, 2014 by Becky Regal / Posted in Tutorials, Uncategorized / Leave a comment

Don’t be selfish . . .

I have mentioned before that my house has VERY LITTLE storage. Because of this, you will be seeing me post with storage ideas more then once.

IMG_20141005_150545

My mother in law comes out to visit often and I am so blessed that she loves to be involved with my ideas and projects. I am also blessed because she sews the cutest little cloths for my daughter and she is an expert thrift shopper. The only problem with all this is that I have no where to put all the cloths.

Last time she was out visiting she came up with a solution to my problem. I buy wipes and night time diapers from costco and the box they come in is really strong. So, I save those boxes and put my daughters cloths in them that are too small or too big. However, I have been moving all the too small cloths into plastic storage bins to put in our crawl space and those boxes were becoming ugly temp cloths holders.

Sandy, my mother in law, took the leftover drawer lining contact paper I had been using for wall paper in the camper and covered the boxes, making sure to keep the handholds exposed. Make sure to cut the tabs off before you put the paper on.

They fit perfectly into the self in my daughter’s room that we got from IKEA. Now her PJ’s, sweaters and light coats have a pretty home and I have room in the drawers for more thrift store finds

Don’t be selfish . . .

Playhouse Remodel

Posted on September 17, 2014September 17, 2014 by Becky Regal / Posted in Tutorials, Uncategorized / 1 Comment

Don’t be selfish . . .

I have been wanting to find a little playhouse on Craigslist for Elora to play in while I garden, mow and weed. But after finally scoring one for $100, and setting it up in the backyard, I just couldn’t leave it as it was. The colors were all wrong and the inside was drab. Nothing a little spray paint couldn’t fix

I used spray paint made for plastics – I changed brands up a lot. The copper over the bay window was just a metal finish spray paint and it has held up GREAT!

I used poster board and cardboard to block as I painted.

I built a wooden platform for the house to sit on, allowing for the little front porch.

Sorry that I didn’t take pictures as I went a long. But here are some from the final product.

The inside was the same color as the exterior walls. So, I started by spraying the walls yellow, the trim and ceiling cream and the wainscoting blue. The yellow was looking real bad even after three coats. To help disguise the problem I sprayed cream with a stencil and just didn’t worry about lining it all up.

The playhouse was missing the little chair that comes with it when purchased new for $400-$500. Getting it for $100 was worth not having the chair. I was really lucky when I found two classroom chairs for $2 each at the Thrift store. One was blue and the other yellow. (the same colors I used on the walls!) So I used the same little stencil and sprayed the chairs with the opposite color to make them cohesive and cute!

The little kitchen had lost all of the original stickers and was all one color. So I just brushed on a little interest with my paints.

P1200986

My little one just loves her house!

Don’t be selfish . . .

Baby Swing!

Posted on September 6, 2014September 17, 2014 by Becky Regal / Posted in Tutorials / Leave a comment

Don’t be selfish . . .

I have seen these on pinterest and for sale on Etsy. I am awful at following tutorials but I at least read through this one first. http://onesassyhousewife.blogspot.com/2012/07/swingin.html (She has a lot more pictures of the process then I have and did a lot more work and spent more) Then I improvised and made my swing in under 2 hours. I would have been faster except I kept stopping to play with Elora.

Okay, lets get started!

First you need to get a yard of canvas material, or other strong fabric of your choice.
Next, get large dowels from your local lumber store. Or, if your as CHEEP as me, then go to a ReStore or other used building materials type store and buy some stair railings for $0.50 that you can use on many projects to come.
Have a drill
Rope
Sewing Machine
And a tree or other strong secure place to hang it in.

Cut the material into 3 pieces.

About 4 feet long and at about 1.5 feet wide.
About 1.5 feet long and about 6 inches wide.
about 1.5 feet long and about 1.5 feet wide.

I am sorry that I didn’t measure as I cut. I have a very photogenic way of doing things. I had a picture in my mind of how I wanted Elora to fit in it and how it would fit a future baby and I just eyeballed and cut.

Now you need to sew the seams and then sew the pieces together so they look like this. (I doubled them back in many places) The crotch section I created two different slots for the dowel to go in so that I could change it for a baby so the face wouldn’t be at the bar part. (you can see that this canvas had been a drop cloth for my art)

Now drill holes into the dowels at each end by first marking the spot and making sure they will line up over eachother. Choose a drill bit that is large enough for the rope to fit through but small enough that your dowels keep their strength.

Now just slip the dowels through the canvas and the rope through the dowels. Tie the rope together meeting in a point at the top, if you want the swing to be able to spin without the rope twisting and untwisting. I then used a carabiner to clip it on so that I can take it down easy to adjust for baby or toddler.

Now you have a baby swing!

WARNING! child may love it so much that you find yourself pushing them for an hour at a time. Notice the wicker chair in the background? I sit there and read or work on this blog while she swings within reach and I keep it going.

I was on a roll and decided to make two more swings for our “tree set” I made a trapeze and classic wooden. (the wooden one is about to be replace with a wider wooden one for stability reasons.)

Don’t be selfish . . .

Maxi Sheets :)

Posted on August 31, 2014September 17, 2014 by Becky Regal / Posted in Tutorials, Uncategorized / Leave a comment

Don’t be selfish . . .

P1210122

Okay, so, I went through a stage of buying all these sheets at the thrift store with intentions of using them for fabric and making pillows, cloths and the like. Instead they were neatly and not so neatly stored in Tupperware down in the crawl space until this summer when I pulled all my fabric out and started way too many projects. By the last month of summer I had 5 projects going and none finished. Determined to get the place clean before we hosted a catered business event, I stayed up late sewing on the fly.

This maxi dress is one of the results of my no-pattern, fast sew projects.

First buy a sheet you like. I got a king sized one and I am glad I did for a number of reasons.

I messed up when cutting the skirt out and underestimated my size :/
I made another maxi dress using the same cloth (I’ll post that one later)
I made a little mini-maxi for Elora that matches mine (scroll down to see)

I cut the shape and size out using my store made dress. And then I cut again because I needed it larger. So, remember that a maxi dress looks lovely flowey and not so good tight so over estimate rather then under estimate

I also bought a sweater like shirt from the thrift store that day to use as the top of my dress. (I will no longer sew with this type material…way to hard for a beginner like me) I cut the sleeves off the top allowing the seams to stay with the shirt as much as possible so that I wouldn’t have to create new seams.

Now sew skirt together and remember to take your time on the hem (you can also add lace or ruffles on the bottom).

Sew the waist band on the skirt so you can pull elastic through at the waist. Sew the top on at the waist (Try it on before this last step and mark on the shirt with chalk how high you want the skirt to go on your midsection). Sew all together and your done!

I used the lefts overs to sew a mini maxi for Elora. I used muslin and elastic for her top and the straps are just the muslin sewn and cut to tie together on the shoulders.

Don’t be selfish . . .

Related articles

Related articles

Related articles

Related articles